DIY Bike Wheels Welded With Rebar

[Liebregts] is doing the job on a trike structure, and needed a pair of wheels to go up entrance. Standard bicycle wheels wouldn’t do, as they are not created to function with a single-sided guidance. They also preferred to be equipped to mount disc brakes. Hence, they established about creating a established of custom made wheels to do the work.

The make started with a typical established of 20″ bicycle wheel rims with all the spokes taken out. A ring of steel rebar welded on the internal perimeter gave the rims more energy. A set of hubs and axles have been then fabbed up with a welder and lathe, with provisions for bolting on disc brake parts. Lengths of rebar were then welded in as non-adjustable spokes. Upcoming, it was time for a coat of paint. Lastly [Liebregts] mounted the tires and brakes, and named the work done.

Certainly, it is attainable to invest in wheels specially for trike builds. Even so, [Liebregts] identified it challenging to come across accurately what they required, specially in which the disc brake choice was worried. The ideal possibility was a custom create.  The ensuing wheels are clearly a lot heavier than common bike wheels, but they are also very likely a reasonable little bit more robust, way too. If you will need to weigh down a tarpaulin, for case in point, these wheels may just do the trick.

We’ve found some other mad wheels on trikes prior to, much too! Oh, and who claims wheels have to have to be a entire circle, anyway? Creativeness will in no way cease to amaze!